Welcome to fireflyprops.net. Click here to register

47 and 47A Side by Side

Back by popular demand: The 47A Forum

Re: 47 and 47A Side by Side

Postby monkey540 » Tue Dec 15, 2015 9:39 pm

pennausamike wrote:Some info from my Sidkit builds, but I used the Badger thumbscrews on mine:

Drilled and tapped the shrouds for the set screws to hold the thumbscrews.
I hand drilled the knurled knobs and the frame mounting dimples for a 4-40 X 1/2"L set screws on the first Mal pistol.
Even the QMx knurled knobs are glued on.
Mine came with one detached; I glued it back on.
This lousy picture got worse when it converted to a JPEG
I have the tap size listed as either 3mm (Badger thumbscrews) or 4-40
which is what I drilled the Sidkit thumbscrews.

Image

The top pistol in the pic below has the Sidkit thumbscrews,
the lower example has the nickel-plated-brass thumbscrews.

Image

Maybe that helps,
Mike


Looks like my 4 mm thumbscrews would work for a sidkit, but are too big for Badger's thread holes.

My QMX also had loose thumbscrews I had to glue back in, mine was a polystone one, not sure if yours was one of the earlier ones.

For a cheap alternative, i'd suggest one of mine in white plastic or frosted acrylic to get the fine details. and just drill the correct hole size. Or if you want metal, you can try the model I uploaded as well.

Lots o choice.
User avatar
monkey540
Independent Soldier
 
Posts: 147
Joined: Sat Nov 30, 2013 3:44 am
Location: Edmonton, Alberta

Previous

Return to The Model 47A

Who is online

Users browsing this forum: No registered users and 1 guest