Welcome to fireflyprops.net. Click here to register

Alliance food bars

Episode 1 - Serenity

Re: Alliance food bars

Postby Miker » Fri Nov 14, 2014 12:16 am

pennausamike wrote:Well, here is the scan, but I don't see where this is more helpful than the dimensioned picture.

Image

I put a scale on the scan deck also, but I couldn't get it lined up because of the plastic around the glass.
Also, the angled sides fade out of sight.


First time seeing this. Very cool :jayne:
"If anyone gets nosy, just...you know... shoot em"
User avatar
Miker
Independent Soldier
 
Posts: 181
Joined: Tue May 13, 2014 11:50 pm

Re: Alliance food bars

Postby dsears30 » Sat Jun 13, 2015 2:34 am

Pretty cool, so did anyone end up making them or the face plate of it?
User avatar
dsears30
Independent Soldier
 
Posts: 274
Joined: Sun Jun 29, 2014 4:08 am

Re: Alliance food bars

Postby micjwelch » Tue Jun 30, 2015 7:49 pm

I put a picture of the finished print at http://www.thingiverse.com/thing:474372. Took some spot putty and filler primer to smooth out the sides, but it wasn't too difficult.
micjwelch
Reaver
 
Posts: 5
Joined: Thu Jul 29, 2010 11:27 am

Re: Alliance food bars

Postby AZSneed » Tue Jun 30, 2015 10:31 pm

How does it taste?
User avatar
AZSneed
Browncoat
 
Posts: 2477
Joined: Thu Nov 05, 2009 2:03 am
Location: Mountain Creek-Alabama-Verbena

Re: Alliance food bars

Postby micjwelch » Wed Jul 01, 2015 4:07 pm

Tastes like spray paint.
micjwelch
Reaver
 
Posts: 5
Joined: Thu Jul 29, 2010 11:27 am

Re: Alliance food bars

Postby AZSneed » Wed Jul 01, 2015 9:55 pm

Yummy.... :shock:
User avatar
AZSneed
Browncoat
 
Posts: 2477
Joined: Thu Nov 05, 2009 2:03 am
Location: Mountain Creek-Alabama-Verbena

Re: Alliance food bars

Postby monkey540 » Sun Sep 20, 2015 5:48 pm

Can anyone with a screen accurate food bar please help me out with the following dimensions, I'm almost finished my model.

Image


I had the thingiverse bar printed and the dimensions were all wrong for 1:1, too big by about 30% and the wrong characters, so I modelled my own, and I'd like to finish off a few parts to be as accurate as possible.
User avatar
monkey540
Independent Soldier
 
Posts: 147
Joined: Sat Nov 30, 2013 3:44 am
Location: Edmonton, Alberta

Re: Alliance food bars

Postby pennausamike » Sun Sep 20, 2015 8:52 pm

pennausamike wrote:Took dimensions with dial calipers.
Dimensions are in inches to three places.

Image

Image

Hope that helps,
Mike
User avatar
pennausamike
Browncoat
 
Posts: 2006
Joined: Mon May 25, 2009 1:21 am
Location: Pennsylvania, USA

Re: Alliance food bars

Postby monkey540 » Sun Sep 20, 2015 11:50 pm

Yup I saw that and used it for the dimensions given and thank you for that, however, none of the dimensions I've marked on my diagram are in those pics.
User avatar
monkey540
Independent Soldier
 
Posts: 147
Joined: Sat Nov 30, 2013 3:44 am
Location: Edmonton, Alberta

Re: Alliance food bars

Postby pennausamike » Mon Sep 21, 2015 12:55 am

monkey540 wrote:Yup I saw that and used it for the dimensions given and thank you for that,
however, none of the dimensions I've marked on my diagram are in those pics.


The dimension of the center oval (1.080") is shown there,
unless your red lines marking that aren't part of the dimensions you're looking for.
Also, you can extrapolate the other dimensions you are looking for
by creating a "scale" from given dimensions and applying them to the distances you are looking for.
I used that approach on my sonic,

Image

I don't know how clearly it shows in the pictures,
but I created drawing scales from the known distances in the photographs,


and there are plenty of known sizes in the original scaled pictures to get everything but the depths.
I'll see if I can dig mine out and check at some point.

Mike
User avatar
pennausamike
Browncoat
 
Posts: 2006
Joined: Mon May 25, 2009 1:21 am
Location: Pennsylvania, USA

PreviousNext

Return to Serenity

Who is online

Users browsing this forum: No registered users and 1 guest

cron